Table Mats for ESD Protection

StatMat-T 4' x 32.8' Table Mat
2-Layer Rubber, Heat and Chemical Resistant
StatMat-T
StatMat-T

Features:

  • Temperature resistant. Will not get damaged by hot solder or soldering irons.
  • Offer excellent resistance to oil, grease and most of common solvents.
  • Useful for semiconductor, computer & electronic parts factories, electronic assembly, and chemical laboratories.
  • Both have mat finish (glossy available through special orders).
  • Will not peel, chip, or curl.
  • Ground cords and snaps are included with the kits only.
  • Materials
    • Top layer: static dissipative NBR
    • Bottom layer: conductive NBR.
  • Color:
    • Top layer: G=Grey, LB=Light Blue, Gr=Green
    • Bottom layer: Black
Technical Specification
Thickness 0.080" (2mm)
Width 4' (1.2m)
Length 32.8' (10m)
Hardness (KSM6518-19) Top layer - 65
Bottom layer - 66
Tensile Strength (LB/SQ inch) Top layer - 1548
Bottom layer - 1820
Elongation (%) Top layer - 395
Bottom layer - 285
Surface Resistivity (ASTM-D257) Top layer - 107-8 Ohm/Sq
Bottom layer - 104-5 Ohm/Sq
Resistance to ground Less than 107 Ohm/Sq
Chemical Resistance Solvent, Acidic, Alkali, Oil, Aromatics
Non Chemical Resistance D.O.P Ketone
5KV decay time < 0.01sec.
  Table top set ATS-a' x b'
2-Layer Rubber, Heat and Chemical Resistant

The set includes:

  • StatMat-T Size a' x b' - Table Mat 2-Layer Rubber,
  • A-MS10 - Male easy mount mat grounding snap with label,
  • AML-100H - Adjustable wrist strap, 4mm snap, blue, coil cord 6ft
  • AS3-B - Dual banana jack with female snap 10mm, cord 10ft
Select part number from the following table:
Size Part Number
Grey Light Blue Green
4' x 32.8'
(1,2 x 10 m)		 StatMat-T-G StatMat-T-LB StatMat-T-Gr
2' x 3'
(0,6 x 0,9 m)		 ATS-2x3-G ATS-2x3-LB ATS-2x3-Gr
2' x 4'
(0,6 x 1,2 m)		 ATS-2x4-G ATS-2x4-LB ATS-2x4-Gr
2.5' x 4'
(0,76 x 1,2 m)		 ATS-2.5x4-G ATS-2.5x4-LB ATS-2.5x4-Gr

 




Quick Search

American Distribution

United States of America,
Canada and Mexico: 
BOMIR INC. (Master Distributor)
E-mail: bomir@bomir.com
Tel: (570)842-4725
Fax: (570)842-4290

Disclaimer

Bokar International is committed to continuing development of new products and improvements to existing products. Specifications are subject to change without notice.

BOKAR

Facebook

2012 Design by GraphicSite STUDIO. All rights reserver.